NEWS & EVENTS » NEWS » VALIDATION HW
NEWS
Page 1 of 2
Validation HW

14/08/2019

Contact
info@zmt.swiss

 

IT’IS demonstrates the Test Field Diversity method for Fast Model Validation

The second episode of the new video series by IT'IS explains how the radiofrequency response of active implants can be quickly and robustly validated with the Test Field Diversity method.

 
Validation HW

17/07/2019

Contact
info@zmt.swiss

 

TDS-B1: Magnitude and Polarization Measurement in MRI Coil

Watch a short video to see how you can quickly and accurately measure the magnitude and polarization of the radiofrequency magnetic field inside or close to any MRI coil in free-space or inside phantoms with our TDS-B1.

 
Validation HW

19/06/2019

Contact
info@zmt.swiss

 

IT’IS demonstrates the piX Analyzer and the new SAIMD-U

Launch of new video series explaining how the radiofrequency response of active implants can be easily characterized with the latest off-the-shelf benchtop testing equipment and applying the latest assessment procedure. 

 
Validation HW

07/11/2017

Contact
info@zmt.swiss

 

New Microphotonic Voltage Probe RFoF1P4MED

ZMT's is pleased to announce its novel RFoF1P4MED technology to reliably determine the risk of device malfunction due to RF-exposure during an MRI exam.

 
Validation HW

11/10/2017

Contact
info@zmt.swiss

 

MITS High Field Strength Resonators

ZMT is pleased to introduce the High E-Field Resonators which extend the capabilities of the MITS family for Tier 1 and Tier 2 (ISO/IEC TS 10974) safety testing of up to 100 mm long implantable medical devices.

 

 
Validation HW

22/08/2017

Contact
info@zmt.swiss

 

MP-AIMD Platforms

ZMT is proud to announce the launch of our new MP-AIMD Platforms that simplify testing of MRI implant safety (ISO/IEC TS 10974) while accelerating evaluations and reducing the uncertainty of implant model validations.

 

 
Validation HW

23/05/2016

Contact
info@zmt.swiss

 

First MITS3.0 Installed in Asia

ZMT Zurich MedTech AG and Dymstec are pleased to announce the installation of the first Medical Implant Test System MITS3.0 in Korea.

 

 
Validation HW

20/02/2014

Contact
info@zmt.swiss

 

ZMT releases piX System

We are pleased to announce the piX System, which is used for demonstrating the radiofrequency (RF) safety of patients with medical implants during MRI examinations.

 
Validation HW

15/04/2011

Contact
info@zmt.swiss

 

MITS1.5/MITS3.0 Successfully Installed at FDA

We are proud to announce the successful installation of our MITS1.5/MITS3.0 implant test systems at the Food and Drug Administration Center for Devices and Radiological Health  (FDA-CDRH).

 

 
Validation HW

02/03/2011

Contact
info@zmt.swiss

 

MITS Movie Available

Implant safety testing using our MITS hardware demonstrated!

 
Page 1 of 2
 
first page previous page 1 2 ALL next page last page
 
Latest News