VALIDATION HW » piX SYSTEM » piX COMPONENTS
piX components

Components

piX Excitors, TDS and DASY6

The following components can be ordered without signal generating and controlling system*.

 

piXE64HPV1

Excitor optimized for 64MHz and high permittivity media, generating a local uniform tangential excitation of less than 10 mm

piXE64LPV1

Excitor optimized for 64MHz and low permittivity media, generating a local uniform tangential excitation of less than 10 mm

piXE128HPV1

Excitor optimized for 128MHz and high permittivity media, generating a local uniform tangential excitation of less than 10 mm

piXE128LPV1 

Excitor optimized for 128MHz and low permittivity media, generating a local uniform tangential excitation of less than 10 mm

TDS system 

SPEAG's Time Domain Sensor system is optimized to avoid the crosstalking with the device under test (DUT) and the excitor during measurements with the piX system. The TDS system is composed of an E1TDSz/MRI single axis free-space probe, sensitive to E-field parallel to probe axis and a 1RU1TDS remote unit for single-axis probes. TDS is fully calibrated (ISO17025) and offers full traceability and reproducibility. Additional accessories can be found on the SPEAG website.

Scanning System TX2-90XL

Scanning System TX2-90XL is a DASY system from SPEAG specially optimized for accurate transfer function scanning procedures. It includes the necessary software extensions and accessories to effectively perform the required tests with high precision and repeatability.
*piX excitors only available for customers already using the system